3 Ways to Identify Problems With Your Sprinkler Head

Las Vegas homeowners that have an irrigation system on their property knows how vital it is that this particular system works as it should. When you have problems with your sprinkler head, you need to take care of them as soon as possible. You need to do this so that you prevent damage to your crops, water waste and more issues.

Sprinkler Head Shows Disordered Spraying

First, you should look at your sprinkler as its working in action. Look to see if the spray of the sprinkler is consistent. Does the sprinkler sputter? Or does it create an uneven spray? If you do see an uneven spray, your sprinkler head might be clogged. As you mow your lawn, dirt, dust and lawn cuttings might clog up the head. It could even be clogged by rainfall. The rainfall on your sprinkler clogs the head’s holes. To remove the debris, just take out the nozzle and clean it.

Dead Grass

If your lawn grass is dead or dried, then that means that those areas are not getting enough water. This could mean that your sprinkler head is not rotating as it should. Or perhaps a zone valve is not working properly. You can simply watch the sprinkler to see if it’s not working well. If the problem lies with the sprinkler head, then you can simply replace it. Bigger issues may require that you call in the services of Las Vegas irrigation repair technicians.

Yellowing Grass

Is there yellowing grass located around your sprinkler head? If this is the case, you might have a leak. This might be because you are overwatering the area. Walk around the area of the sprinkler head. Does the surrounding area feel spongy? When you watch the sprinkler head in action, does the water bubble to the surface? If you find that you have either of those problems, you could have a leak. A technician will need to dig down to the actual pipe and replace it. Whatever issue you find, take care of it as soon as possible. Even if one of your sprinkler heads start to leak, your water bills can go up astronomically.